GEOMETRY - DRAWING Section 

	3DShapesTool.zip	Macs	05.21.08	5+	PC-Mac	User
Creates various 3d shapes: cone, pyramid, sphere...
Install:Just drop it in Plugins folder. Menu: Toolbar

	3d_grid.rb	J. Patrick, D. Bur	08.06.04	4+	PC-Mac	User
Creates a 3D grid along X,Y,Z axis.
Install:Just drop it in Plugins folder. Menu: Plugins

	AddVertex+.rb	TIG	04.06.07	4+	PC-Mac	User
Marks All Vertices in Selection (with cPoints) if any. Adds cPoint at Picked Point on Edge, Face, other - cLine, Groups/Components etc, using normal inferences. Edge+Shift=Split-Edge, Face+Alt=Split Face. Undoes each step.
Install:Just drop it in Plugins folder. Menu: Plugins

	AddVertex.rb	TIG	03.21.07	4+	PC-Mac	User
Marks All Vertices in Selection (with cPoints). Adds new Vertex at Picked Point on Edge and marks it.
Install:Just drop it in Plugins folder. Menu: Plugins

	angle_between.rb	T. Burch + @Last	12.03.04	4+	PC-Mac	Dev.
Computes and outputs in Ruby console: angles, vectors between lines.

	arcs.rb	D. Bur	11.12.07	5+	PC-Mac	User
Two new drawing methods for arcs: center and two points, three points.
Install:Just drop it in Plugins folder. Menu: Draw

	auto_centerpoint_v10.zip	J. Foltz	04.08.08	6+	PC	User
Auto center points: When on, adds a center point for circles and arcs.
Install:Just drop it in Plugins folder. Menu: Plugins

	bez-patch-1-1.zip	V. Liu	01.31.08	6+	PC-Mac	User
Draws and edits Bezier Patches or Grids.
Install:Unzip in Plugins folder. Menu: Draw

	bez-patch-1[1]0.zip	V. Liu	12.11.06	5+	PC-Mac	User
Draws and edits Bezier Patches or Grids.
Install:Unzip in Plugins folder. Menu: Draw

	bezier.rb	@Last	08.30.04	4+	PC-Mac	User
Draws and edits Bezier curves.
Install:Just drop it in Plugins folder. Menu: Draw

	Bezierspline.zip	Fredo6	01.24.08	5+	PC-Mac	User
Complete set of polylines and splines curves commands: create, modify, convert. Cubic Bezier spline curve2, Uniform B-Spline, Polylines, modification of precision, add/delete control points, support of loop closing, conversion of any curve to spline curves, language translation support (French, German, English, Hungarian, Portugese). Doc included. version 1.1 fixes bugs with inference and adds enhancements in translation module.
Install:Unzip in Plugins folder. Menu: Draw

	bezier_flight.rb	M. Gorbett	03.09.05	4+	PC-Mac	User
A tool to create Bezier curves: select 4 points: start point of the curve, endpoint of the curve, second control point, last control point. Node spacing: While creating the bezier curve, the node spacing (in inches) will be displayed in the VCD. You can change it by entering new values to suit the scale of your model.
Install:Just drop it in Plugins folder. Menu: Draw

	box.rb	@Last	07.28.04	4+	PC-Mac	User
Creates a box at 0 0 0.
Install:Just drop it in Plugins folder. Menu: Draw

	boxes_array.rb	T. Burch	09.03.04	4+	PC-Mac	User
Creates an array of boxes (rectangular Acad-like array).
Install:Just drop it in Plugins folder. Menu: Plugins

	boxes_random.rb	T. Burch	09.03.04	4+	PC-Mac	User
Creates an array of boxes with random height.
Install:Just drop it in Plugins folder. Menu: Plugins

	box_pos.rb	J. Wile	07.29.04	4+	PC-Mac	User
Creates a box at a xyz point.
Install:Just drop it in Plugins folder. Menu: Tools

New	BZ__Catmull.rb	Fredo6	11.18.08	6+	PC-Mac	User
A plugin extension to bezierspline.rb. Cannot be used in standalone. Draws uniform B-spline curve (i.e. drawn with a set of control points which are located on the curve), with control of the total number of segments
Install:Special, see Documentation. Menu: Context

	BZ__Courbette.rb	Fredo6	08.22.08	6+	PC-Mac	User
A plugin extension to bezierspline.rb. Cannot be used in standalone. Join control points by arc of circles (apparently like Spiro in Inkscape and also in Autocad)
Install:Special, see Documentation. Menu: Context

New	BZ__FSpline.rb	Fredo6	11.18.08	6+	PC-Mac	User
A plugin extension to bezierspline.rb. Cannot be used in standalone. Draws uniform B-spline curve (i.e. drawn with a set of control points which are located on the curve), fitted to a polyline.
Install:Special, see Documentation. Menu: Context

	BZ__Segmentor.rb	Fredo6	04.10.08	5+	PC-Mac	User
Divide a polyline in a specified number of segments. Cannot be used in standalone, uses bezierspline.rb
Install:Just drop it in Plugins folder. Menu: Plugins

	centerpoint.rb	T. Burch	12.06.04	4+	PC-Mac	User
Add a construction point to the center of a selected entity or group.
Install:Just drop it in Plugins folder. Menu: Plugins

	Chamfer_Along_Path.rb	A. Joyce	06.19.06	4+	PC-Mac	User
Creates a chamfer. This tool differs from ExtrudeAlongPath in that the extrude face is a triangular shape with a specified width and height. The triangular face is referenced from the edge. Branching paths will not extrude.
Install:Just drop it in Plugins folder. Menu: Tools

	clinetool.zip	J. Foltz	07.15.08	5+	PC-Mac	User
Similar to the pen tool but to draw construction lines.
Install:Unzip in Plugins folder. Menu: Toolbar

	cloud.rb	D. Bur	07.03.07	5+	PC-Mac	User
Reads DEM points cloud, several formats supported. Option to use components for points representation, all units supported. Layers selectable, triangulation option. Requires example.dat to run the example.
Install:Just drop it in Plugins folder. Menu: Plugins

	Cloud_V6.zip	D. Bur	11.12.07	6+	PC-Mac	User
Reads DEM points cloud, several formats supported. Option to translate the origin, use components for points representation, all units supported. Layers selectable, triangulation option. Requires example.dat to run the example. Doc included.
Install:Just drop it in Plugins folder. Menu: Plugins

	comp_example1.rb	T. Burch	06.23.07	4+	PC-Mac	Dev.
A snippet that demonstrates how to create a component and add it to your model from Ruby.
Install:Special, see Documentation. Menu: File

	cone.rb	D. German	08.30.04	4+	PC-Mac	User
Draws a cone.
Install:Just drop it in Plugins folder. Menu: Draw

	cone11.rb	ODM	08.31.04	4+	PC-Mac	User
Draws a cone at a given position.
Install:Just drop it in Plugins folder. Menu: Draw

	conetop1.rb	ODM	08.31.04	4+	PC-Mac	User
Draws a cone at a given position.
Install:Just drop it in Plugins folder. Menu: Draw

	ContourMaker.rb	TIG	12.19.05	4+	PC-Mac	User
Creates contour lines in groups or components.
Install:Just drop it in Plugins folder. Menu: Plugins

	contour_lines.rb	D. Bur	10.12.04	4+	PC-Mac	User
Creates contour lines with a set of faces. Works with trianglular and quadrangular faces.
Install:Just drop it in Plugins folder. Menu: Plugins

	crate.rb	R. Wilson	09.27.04	4+	PC-Mac	User
Makes inset faces in faces. Requires offset.rb
Install:Just drop it in Plugins folder. Menu: Plugins

	crate1.rb	R. Wilson	05.09.07	5+	PC-Mac	User
Makes inset faces in faces. Requires offset.rb.
Install:Just drop it in Plugins folder. Menu: Plugins

	cratetool.rb	T. Track	12.09.04	5+	PC-Mac	User
Creates an array of Crates in XY plane or XZ plane or YZ plane. Makes anything from Bookshelves to Grilles to Highrise Curtainwalls. Requires offset.rb.
Install:Just drop it in Plugins folder. Menu: Plugins

	cubicbezier.rb	C. Fale	03.14.05	4+	PC-Mac	Dev.
A set of functions to interpolate points and segments on Bezier curves.

	cubic_colored_grid.rb	D. Bur	08.11.04	4+	PC-Mac	User
Creates a cubic 3D colored grid: red, green, blue, along X Y Z axis.
Install:Just drop it in Plugins folder. Menu: Plugins

	cubic_grid.rb	D. Bur	08.11.04	4+	PC-Mac	User
Draws a 3D cubic grid.
Install:Just drop it in Plugins folder. Menu: Plugins

	curvestitcher.rb	R. Wilson	08.03.04	4+	PC-Mac	User
Stitches two curves.
Install:Just drop it in Plugins folder. Menu: Plugins

	curvestitcher21.rb	R. Wilson	08.18.04	4+	PC-Mac	User
Stitches two curves. Version 2.1.
Install:Just drop it in Plugins folder. Menu: Plugins

	cylinder.rb	T. Track	09.24.04	4+	PC-Mac	User
Creates cylinder(s) and or elbows.
Install:Just drop it in Plugins folder. Menu: Plugins

	dashes.rb	D. Bur	12.21.06	5+	PC-Mac	User
Creates dashes on roads, starting from a selection of connected lines, arcs or from a curve.
Install:Just drop it in Plugins folder. Menu: Plugins

	dim_angle.rb	D. Bur	11.28.05	4+	PC-Mac	User
Creates an angular dimension with arc and text in a group.
Install:Just drop it in Plugins folder. Menu: Tools

	divide_cpoint.rb	D. Bur	07.15.08	5+	PC-Mac	User
Similar to the "divide" command of Autocad, inserts points along a line, given the number of segments. Option to break a line or segment into parts.
Install:Just drop it in Plugins folder. Menu: Plugins

	dline.zip	D. Bur	10.01.08	6+	PC-Mac	User
Draws double lines, like the famous “dline.lsp” Autolisp routine in Autocad. Although it doesn’t have all its features, you can draw wall bases, extrude them in one go and in 3D.
Install:Just drop it in Plugins folder. Menu: Tools

	dome.rb	F. Wiesner	09.06.04	4+	PC-Mac	User
Constructs a dome based on a circle, polygon or exploded circle lines. The selected face gives the up direction.
Install:Just drop it in Plugins folder. Menu: Plugins

	door_lintel.rb	D. Bur	05.21.08	5+	PC-Mac	User
Creates lintels and sills on doors and windows between two walls sides, when raising 2D plans to 3D model.
Install:Just drop it in Plugins folder. Menu: Plugins

	door_lintel.zip	D. Bur	05.21.08	5+	PC-Mac	User
Creates lintels and sills on doors and windows between two walls sides, when raising 2D plans to 3D model.
Install:Just drop it in Plugins folder. Menu: Plugins

	drawhelix11.rb	P. Brown	08.04.04	4+	PC-Mac	User
Creates a helix, big to small or small to big.
Install:Just drop it in Plugins folder. Menu: Draw

	drawhelix13.rb	P. Brown	08.04.04	4+	PC-Mac	User
Creates a helix, big to small or small to big. version 1.3.
Install:Just drop it in Plugins folder. Menu: Draw

	drop.rb	TBD	07.28.04	4+	PC-Mac	User
Moves the selection at a choosen Z.
Install:Just drop it in Plugins folder. Menu: Context

	Ellipse.zip	D. Bur	10.15.07	5+	PC-Mac	User
Tool that draws ellipses in 3D space, entering input points at axis ends.
Install:Unzip in Plugins folder. Menu: Draw

	eq_grapher.rb	J. Foltz	08.22.08	6+	PC-Mac	User
Graphs algebraic functions, equation grapher.
Install:Just drop it in Plugins folder. Menu: Plugins

	extend11.rb	R. Wilson	08.20.05	5+	PC-Mac	User
Trims or extends an edge from the context menu after selecting an edge.
Install:Just drop it in Plugins folder. Menu: Context

	ExtrudeAlongPath.rb	TIG	08.08.05	4+	PC-Mac	User
Creates rectangular faced 'followme' extrusions along a path - Use it to make walls, fascias, soffits, frames, rails etc, starting from a selection of joined edges.
Install:Just drop it in Plugins folder. Menu: Plugins

	extrudelinetool.rb	D. Bur	11.12.07	4+	PC	User
Creates faces along selected lines at a given height selected with 2 points clicks. Surfaces from curves are soften, option to create a group with resulting objects. VCB supported.
Install:Just drop it in Plugins folder. Menu: Plugins

	extrude_lines.rb	D. Bur	13.09.07	4+	PC-Mac	User
Creates vertical faces along selected lines at a given height, and curves as well. When curves are selected, edges are soften. Option to create a group with extruded objects.
Install:Just drop it in Plugins folder. Menu: Plugins

	extrud_selected_faces_along_normal.rb	Wkai	06.21.05	5+	PC-Mac	User
Extrude faces along their normals instead of Z axis.
Install:Just drop it in Plugins folder. Menu: Plugins

	FacePusher.rb	U. Tessel	08.22.08	6+	PC-Mac	User
Allows to push/pull all faces in the selection by the same distance. Multiple instances of components are only pulled once. The faces can be filtered by the material. A second material can be used to pull other faces by the same distance but to the opposite direction.
Install:Just drop it in Plugins folder. Menu: Plugins

	fflipper_embryo.zip	M. Pehle	12.11.06	5+	PC-Mac	User
Flips faces depending on their material.
Install:Unzip in Plugins folder. Menu: Tools

	fflipper_v6_4.zip	M. Pehle	04.21.08	5+	PC-Mac	User
Flips faces depending on their material. Version 6.4.
Install:Unzip in Plugins folder. Menu: Tools

	FilletTool.rb	T. Track	06.10.05	4+	PC	User
Input the radius and creates a filleted rectanglular area. Error checking included.
Install:Just drop it in Plugins folder. Menu: Plugins

	Geodesic.rb	G. Kistner	06.11.08	5+	PC-Mac	Dev
Geodesic class, allowing you to create a Geodesic dome/sphere based on a tetrahedron or octahedron.
Install:Just drop it in Plugins folder. Menu: None

	Geodesic_SketchUp.rb	G. Kistner	06.11.08	5+	PC-Mac	User
Creates Geodesic domes/spheres based on tetrahedrons or octahedrons.
Install:Just drop it in Plugins folder. Menu: Plugins

	GetDimensions.rb	Cptan Panic	12.19.05	5+	PC-Mac	User
Displays Dimensions of Component.
Install:Just drop it in Plugins folder. Menu: Plugins

	graphit.rb	R. Wilson	02.12.05	5+	PC-Mac	User
Graph simple equations. Input parameters in dialog box according to the form f(x)=ax^q+bx^r+cx^s+d. Function is graphed around the origin.
Install:Just drop it in Plugins folder. Menu: Plugins

	grid.rb	J. Patrick	07.30.04	4+	PC-Mac	User
Draws a simple grid and makes a group of it.
Install:Just drop it in Plugins folder. Menu: Draw

	heightfield_gen.rb	D. Bur	08.25.04	5+	PC-Mac	User
Create a mesh based on a greyscale PGM or PPM image. Altitude is determined by the color of each pixel: white is highest altitude, black is lowest. Support for layer, automatic cleanup of coplanar edges.
Install:Just drop it in Plugins folder. Menu: Plugins

	heightfield_gen_v6.rb	D. Bur	07.15.08	6+	PC-Mac	User
For SketchUp 6 only. Creates a mesh based on a greyscale PGM or PPM image. Altitude is determined by the color of each pixel: white is highest altitude, black is lowest. Support for layer, automatic cleanup of coplanar edges.
Install:Just drop it in Plugins folder. Menu: Plugins

	helix.rb	R. Wilson	07.30.04	4+	PC-Mac	User
Creates a helix based on a curve.
Install:Just drop it in Plugins folder. Menu: Plugins

	helix12.rb	R. Wilson	09.27.04	4+	PC-Mac	User
Creates a helix based on a curve, more options.
Install:Just drop it in Plugins folder. Menu: Plugins

	hel_ramp.rb	ODM	09.04.04	5+	PC-Mac	User
Creates a helicoidal ramp with the 2 selected curves.
Install:Just drop it in Plugins folder. Menu: Context

	IncRandomPushPull.rb	TIG	04.12.07	4+	PC-Mac	User
PushPulls selected faces by incremented random amount within a specified range.
Install:Just drop it in Plugins folder. Menu: Plugins

	JointPushPull.zip	Fredo6	02.25.08	6+	PC-Mac	User
Joint Push Pull: transformation that tries to offset faces by a distance along their normal while generating a contiguous shape, so a kind of hybrid transformation between classic Sketchup push-pull and Vector-oriented push-pull. The script also contains a Normal and a Vector Push Pull in multi-face mode. Textures are transferred. This version allows to enter graphically the distance and orientation. and get a visual feedback of the transformation. Full Documentation included (in English).
Install:Unzip in Plugins folder. Menu: Toolbar

	k_tools_20.rb	K. Kruch	08.01.05	4+	PC-Mac	User
Draws mathematical Graphs in 2D and 3D and some geometrical constructions.
Install:Just drop it in Plugins folder. Menu: Plugins

	k_tools_21.rb	K. Kruch	09.21.05	4+	PC-Mac	User
Draws mathematical Graphs in 2D and 3D and some geometrical constructions. Draws curves and curved areas.
Install:Just drop it in Plugins folder. Menu: Plugins

	k_tools_50.rb	K. Kruch	09.11.07	4+	PC-Mac	User
Draws mathematical Graphs in 2D and 3D and some geometrical constructions. Draws curves and curved areas. Version 5.0.
Install:Just drop it in Plugins folder. Menu: Plugins

	line2cyl.rb	D. Bur	05.13.08	4+	PC-Mac	User
Creates cylinders with selected edges as axes. Also works with arcs, circles, and curves.
Install:Just drop it in Plugins folder. Menu: Plugins

	lsystem.rb	a4chitect	04.21.08	5+	PC-Mac	User
Creates plants based on a Lsystem-like algorithm.
Install:Just drop it in Plugins folder. Menu: Plugins

	ltest.rb	T. Burch	12.03.04	4+	PC-Mac	User
Creates lines starting from left-clic points. Useful to draw 2D trees for instance.
Install:Just drop it in Plugins folder. Menu: Tools

	makewindow.rb	S. Cooley	06.11.08	5+	PC-Mac	User
Creates windows to be exported as components, along with materials.
Install:Just drop it in Plugins folder. Menu: Draw

	make_faces.rb	T. Burch	07.22.04	4+	PC-Mac	User
Creates faces only on selected objects that could potentially receive a face.
Install:Just drop it in Plugins folder. Menu: Tools

	make_faces11.rb	T. Burch	09.13.04	4+	PC-Mac	User
Creates faces only on selected objects that could potentially receive a face, statistics provided.
Install:Just drop it in Plugins folder. Menu: Tools

	MatchboxPlugin.zip	Antantantant	08.22.08	6+	PC-Mac	User
Tool to quickly create vehicles components.
Install:Unzip in Plugins folder. Menu: Toolbar

	MatchboxPlugin_r11.zip	Antantantant	10.01.08	6+	PC-Mac	User
Tool to quickly create vehicles components. Version 1.1
Install:Unzip in Plugins folder. Menu: Toolbar

	MatrixProximity-v1[1]4.zip	TIG	11.24.05	5+	PC-Mac	User
Matrix: makes multiple copies of selected component to create rectangular arrays. Proximity: sets level of detail in special Components depending on their 'proximity' (nearness) to the camera/viewer in the current page/view. It requires the use of special 'Proximity Components' in the model or in the 'Proximity Components' folder within the 'Components' folder.
Install:Unzip in Plugins folder. Menu: Tools

	MatrixProximity.rb	TIG	04.08.08	5+	PC-Mac	User
Matrix: makes multiple copies of selected component to create rectangular arrays. Proximity: sets level of detail in special Components depending on their 'proximity' (nearness) to the camera/viewer in the current page/view. It requires the use of special 'Proximity Components' in the model or in the 'Proximity Components' folder within the 'Components' folder. Replaces any of your previous MatrixProximity.rb files. V 1.7
Install:Just drop it in Plugins folder. Menu: Tools

	mesh_additions.rb	@Last	09.16.04	4+	PC-Mac	Dev.
Defines some additional methods for Geom::PoygonMesh.

	numbered_grid.rb	J. Patrick	07.28.04	4+	PC-Mac	User
Draws a grid on specified layer, with numbers along axis.
Install:Just drop it in Plugins folder. Menu: Draw

	orient_faces.rb	TIG	12.19.07	5+	PC-Mac	Dev.
Matches the orientation of a face to any connected 'co-edged' faces. It mimics SketchUp's "Orient Faces" Tool. You can call it from other scripts thus: face.orient_faces
Install:Just drop it in Plugins folder. Menu: None

	parametric_grid.rb	@Last	09.15.04	4+	PC-Mac	User
Create parametric and editable grids. Requires parametric.rb.
Install:Just drop it in Plugins folder. Menu: Tools

	pc_drawmetal_plugins.zip	Drawmetal	07.15.08	6+	PC-Mac	User
Draws curved tapered shapes common in architectural and ornamental metalwork and for calculating the amount of stock required to fabricate the tapers. Mac version also available at http://www.drawmetal.com
Install:Unzip in Plugins folder. Menu: Plugins

	perp_line_plane.rb	D. Bur	10.13.04	4+	PC-Mac	User
Draws a line perpendicular to the selected face, starting from a construction point.
Install:Just drop it in Plugins folder. Menu: Context

	PipeAlongPath.rb	TIG	05.14.07	4+	PC-Mac	User
Select joined lines, arcs, circles, curves, etc. Select -Pipe Along Path- from the Plugins menu. In the dialog choose units (mm/inch), enter outside and inside diameters, number of segements and then OK.
Install:Just drop it in Plugins folder. Menu: Plugins

New	point.rb	Matt666	11.18.08	5+	PC-Mac	User
Tool to draw construction points.
Install:Just drop it in Plugins folder. Menu: Draw

	points_cloud_triangulation.rb	C. Fale, D. Bur	10.15.04	4+	PC-Mac	User
Creates triangles starting from a construction points selection. Requires delaunay2.rb (optimized delaunay triangulation). Useful to create terrains starting from points cloud data.
Install:Just drop it in Plugins folder. Menu: Plugins

	point_at_intersection.rb	J. Foltz	08.27.07	5+	PC	User
Implements a context menu to add a construction point at the intersection of 2 lines.
Install:Just drop it in Plugins folder. Menu: Plugins

	projection_extension.zip	D. Bur	12.19.05	5+	PC-Mac	User
Toolbar of 12 projection tools.
Install:Unzip in Plugins folder. Menu: Toolbar

	projection_v6.zip	D. Bur	08.22.08	6+	PC-Mac	User
Toolbar of 13 projection tools, more user-friendly than previous version. Doc included.
Install:Unzip in Plugins folder. Menu: Toolbar

	project_faces_plane.rb	D. Bur	09.08.04	4+	PC-Mac	User
Project a set of faces perpendicular to the selected (double-clicked) face.
Install:Just drop it in Plugins folder. Menu: Plugins

	project_faces_vector.rb	D. Bur	09.27.04	4+	PC-Mac	User
Project a set of faces along a vector on the selected (double-clicked) face.
Install:Just drop it in Plugins folder. Menu: Plugins

	project_lines_plane.rb	D. Bur	09.08.04	4+	PC-Mac	User
Projects the selected set of lines perpendicular to the selected face, can create new faces too.
Install:Just drop it in Plugins folder. Menu: Plugins

	project_line_plane.rb	D. Bur	08.12.04	4+	PC-Mac	User
Projects the selected line perpendicular to the selected face, can create a new face too.
Install:Just drop it in Plugins folder. Menu: Plugins

	project_line_planes.rb	D. Bur	08.12.04	4+	PC-Mac	User
Projects the selected line perpendicular to the selected set of faces, can create new faces too.
Install:Just drop it in Plugins folder. Menu: Plugins

	project_point_line.rb	D. Bur	08.11.04	4+	PC-Mac	User
Projects the selected construction point perpendicular to the selected line.
Install:Just drop it in Plugins folder. Menu: Plugins

	project_point_plane.rb	D. Bur	08.11.04	4+	PC-Mac	User
Projects the selected construction point perpendicular to the selected face.
Install:Just drop it in Plugins folder. Menu: Plugins

	pushpull_tool.rb	D. Bur	11.02.04	4+	PC-Mac	User
Push pull faces along a vector given with 2 clicks, in any direction.
Install:Just drop it in Plugins folder. Menu: Context

	push_pull_vector.rb	D. Bur	09.07.04	4+	PC-Mac	User
Extrudes a selection of faces along the selected vector instead of Z axis.
Install:Just drop it in Plugins folder. Menu: Plugins

	push_pull_z.rb	D. Bur	08.04.04	4+	PC-Mac	User
Extrudes a face along the Z axis, instead of its normal.
Install:Just drop it in Plugins folder. Menu: Plugins

	push_pull_z_set.rb	D. Bur	07.11.05	4+	PC-Mac	User
Extrudes a selection of faces along the Z axis, instead of their normals.
Install:Just drop it in Plugins folder. Menu: Plugins

	pyramidtool.rb	Macs	05.13.08	5+	PC-Mac	User
Creates a rotated pyramid, based on rotated rectangle tool by @Last.
Install:Just drop it in Plugins folder. Menu: Draw

	RandomPushPull.rb	TIG	10.28.05	4+	PC-Mac	User
PushPulls selected faces by random amount within a specifed range.
Install:Just drop it in Plugins folder. Menu: Plugins

	rectangle.rb	@Last	09.15.04	4+	PC-Mac	User
Draws rotated rectangles.
Install:Just drop it in Plugins folder. Menu: Draw

	rectangle_hole.rb	@Last	09.11.04	4+	PC-Mac	User
Creates hole rectangles with the mouse. First point is the first corner of the rectangle, second point defines the direction of one of the sides, third point defines the opposite side.
Install:Just drop it in Plugins folder. Menu: Plugins

	reglue.rb	Daiku	04.06.07	5+	PC-Mac	Dev.
Extends the ComponentInstance class to be able to reglue itself to it's parent.

	Roof-v2-1.zip	R. Wilson	09.04.07	6+	PC	User
A set of roof making tools: hipped, Mansart, sprocket, gabble-ended, pyramid. Lot of options. Version 2.1. (Fixes).
Install:Just drop it in Plugins folder. Menu: Plugins

	Roof.rb	TIG	01.08.08	5+	PC	User
A set of roof making tools: hipped, Mansart, sprocket, gabble-ended, pyramid. Lot of options. Version 2.1. (Fixes). Sloping fascia and soffit options added, additional warnings for odd geometry, help files updated (included). Version 3.
Install:Just drop it in Plugins folder. Menu: Plugins

	roofplanfollower.rb	D. Belvin	07.16.07	4+	PC-Mac	User
A tool that makes selected ridge line(s) and selected base face(s)into roof(s).
Install:Just drop it in Plugins folder. Menu: Tools

	shapes.rb	@Last	09.16.04	4+	PC-Mac	User
Creates parametric and editable shapes: Box, Cylinder, Cone, Torus, Tube, Prism, Pyramid, Dome. Requires mesh_additions.rb.
Install:Just drop it in Plugins folder. Menu: Draw

	simplify.rb	C. Roosen	09.15.04	4+	PC-Mac	User
Simplify curves.
Install:Just drop it in Plugins folder. Menu: Plugins

	sine_wave.zip	J. Clements	04.10.08	5+	PC-Mac	User
Draw a sine wave curve.
Install:Just drop it in Plugins folder. Menu: Plugins

	SketchyBevel.rb	C. Phillips	05.13.08	5+	PC-Mac	User
Bevel all selected faces by an input amount.
Install:Just drop it in Plugins folder. Menu: Context

	SketchyFFD.rb	C. Phillips	04.07.08	5+	PC-Mac	User
Free deformation of 3D shapes using control points.
Install:Just drop it in Plugins folder. Menu: Context

	skin.zip	D. Belvin	12.04.07	4+	PC-Mac	User
A tool that takes selected edges and connects them, weither they are a closed loop or not. Version 2.2
Install:Unzip in Plugins folder. Menu: Tools

	skin22.zip	D. Belvin	05.13.08	4+	PC-Mac	User
A tool that takes selected edges and connects them, weither they are a closed loop or not. version 2.2.
Install:Just drop it in Plugins folder. Menu: Tools

New	skin23.zip	D. Belvin	11.18.08	4+	PC-Mac	User
A tool that takes selected edges and connects them, weither they are a closed loop or not. version 2.3.
Install:Unzip in Plugins folder. Menu: Tools

	smartdrop.rb	a4chitect + TBD	01.08.08	5+	PC-Mac	User
Moves the selection at a choosen Z or drop selected items at intersection.
Install:Just drop it in Plugins folder. Menu: Context

	stitcher.rb	R. Wilson	07.29.04	4+	PC-Mac	User
Creates faces and edges between to faces.
Install:Just drop it in Plugins folder. Menu: Plugins

	Stroim_dom_1_0.zip	Ryazan Sahi	10.15.07	5+	PC-Mac	User
Tool to build log houses.
Install:Unzip in Plugins folder. Menu: Toolbar

	surveytool.rb	J. Wehby	06.07.06	5+	PC-Mac	User
Uses distance and bearing to draw property data. Starts at Origin.Prompts for Distance and Bearing until user presses Cancel. Draws boundary segment after each entry. Zooms to extents of geometry drawn by the script.
Install:Just drop it in Plugins folder. Menu: Draw

	tf_ruby_scripts.zip	C. Bremer	10.01.08	6+	PC-Mac	User
Set of extensions for Timber Framers: make joint, shop drawing, create peg, timber list. Version 1.6.
Install:Unzip in Plugins folder. Menu: Plugins

	toggle_units_1icon.zip	Matt666	08.22.08	6+	PC-Mac	User
Tool to switch from one unit to another.
Install:Just drop it in Plugins folder. Menu: Toolbar

	toggle_units_5icons.zip	Matt666	08.22.08	6+	PC-Mac	User
Tool to switch from one unit to another.
Install:Just drop it in Plugins folder. Menu: Toolbar

	tooling.zip	a4chitect	01.16.08	6+	PC-Mac	User
Tooling package inspired by techniques described in a book by aranda/lasch: tooling (http://www.arandalasch.com/tooling/). Tools: cracking, recursive dent, pointify, export construction points, voronoi, convex hull.
Install:Unzip in Plugins folder. Menu: Plugins

	ToolsOnSurface_131.zip	Fredo06	07.15.08	6+	PC-Mac	User
Set of tools to drawon surfaces: line (to draw lines on surfaces), various shapes to draw on a surface:Rectangles and Parallelograms, Polygons and circles, defined by their radius or diameter, Ellipses, Circle defined by 3 points, Circular Arcs, Sectors, Freehand on Surface, to freely draw contours, Offset on Surface, to offset a contour on a surface, inside or outside, Eraser on Surface to safely erase portions of contours draw on surface, Contour Editor, applicable to all contours drawn with the above tools. Doc included. Version 1.3.1.
Install:Unzip in Plugins folder. Menu: Tools

	trilateration.zip	D. Bur	08.22.08	6+	PC-Mac	User
Command to draw a triangle, knowing its 3 sides lengths (trilateration).
Install:Just drop it in Plugins folder. Menu: Plugins

	TubeAlongPath.rb	TIG	08.08.05	4+	PC-Mac	User
Creates circular faced 'followme' tube extrusions along a path - Use it to make pipes, ducts, rails etc, starting from a selection of joined edges.
Install:Just drop it in Plugins folder. Menu: Plugins

	volume.rb	TBD	08.02.04	4+	PC-Mac	User
Computes volume of selected parallelepipedic group.
Install:Just drop it in Plugins folder. Menu: Context

	VolumeCalculator.rb	TIG	07.16.07	4+	PC-Mac	User
Calculates the volume of a selected set of 3D faces.
Install:Just drop it in Plugins folder. Menu: Context

	VolumeCalculator21.rb	TIG	12.19.07	5+	PC-Mac	User
Tool to calculate the volume of a selected Groups/Components.
Install:Just drop it in Plugins folder. Menu: Context

	voronoi_convex-hull.zip	a4chitect	05.13.08	6+	PC-Mac	User
Set of tools: cracking works on a group which contains one or more faces, the tool cracks these faces. Recursive dent: works on lines which get bent in the middle, the more times you apply this tool the more deconstructed the lines will get. Pointify: creates construction points at all vertices of the selected lines. Export construction points: exports the coordinates of selected construction points for the voronoi and convex hull calculation.
Install:Special, see Documentation. Menu: Plugins

	WindowGlass.rb	Tomot	10.01.08	5+	PC-Mac	User
Creates a simple window glazing .
Install:Just drop it in Plugins folder. Menu: Plugins

	WindowGlassFrame.rb	Tomot	10.01.08	5+	PC-Mac	User
Creates a window frame with glazing on an existing opening.
Install:Just drop it in Plugins folder. Menu: Plugins

	WindowMullions.rb	Tomot	10.01.08	5+	PC-Mac	User
Creates mullions in existing windows.
Install:Just drop it in Plugins folder. Menu: Plugins

	WindowTools.zip	Tomot	10.01.08	5+	PC-Mac	User
Set of tools to create windows.
Install:Just drop it in Plugins folder. Menu: Plugins

	xLine.rb	R. Wilson	01.22.08	4+	PC-Mac	User
Convert selected edges to construction lines. Bug fix.
Install:Just drop it in Plugins folder. Menu: Context

	xLine2Line.rb	TIG	02.16.06	4+	PC-Mac	User
Convert selected construction lines to edges.
Install:Just drop it in Plugins folder. Menu: Context

	zerkalo_eng2.zip	Sahi	10.29.07	6+	PC-Mac	User
Draws spiral stairs and ladders.
Install:Just drop it in Plugins folder. Menu: Plugins

	zone.rb	TBD	08.05.04	4+	PC-Mac	User
Computes and insert surfaces areas.
Install:Just drop it in Plugins folder. Menu: Plugins

	ZVolume.rb	G. Swarbrick	11.04.06	4+	PC-Mac	User
Calculate the volume of a selected set of 3D faces.
Install:Just drop it in Plugins folder. Menu: Plugins

	[CASF]DelCopEdges.rb	C. Fale	03.14.05	4+	PC-Mac	User
Deletes coplanar edges of a selection.
Install:Just drop it in Plugins folder. Menu: Context

	[CASF]FunShapes.rb	C. Fale	04.18.05	4+	PC-Mac	User
Design fun shapes: horn, various torus, cornucopia and more.
Install:Just drop it in Plugins folder. Menu: Plugins